Focus II setup question

[vicenterc at comcast.net]

I agree with Ed's settings.  I am flying a Focus I and I am very close to those values.  I also have very high expo in rudder also.  Probably around 60-70 % if I recall right.  I could check if you need it but that is pilot preference.
Vicente Bortone

-------------- Original message -------------- 

> I started with +/- 14 deg on aileron, +/- 15 deg on 
> elevator, and pretty much all I could get on rudder. 
> This got me pretty close. I increased the down 
> elevator a bit (for the inverted spin entry) but 
> didn't go back and measure it. Lotsa expo, especially 
> on rudder. If you go to the Focus II building thread 
> on RC Universe, there are some throw recommendations 
> there, but they're pretty close. Start in this range 
> and tune for personal preference. 
> 
> Its a great airplane. 
> 
> Ed 
> 
> 
> --- "Fletcher, Richard" 
> wrote: 
> 
> > Does anyone know the deflection amounts for this 
> > plane? I would like the 
> > throws for the elev, ail and rud for initial setup. 
> > I plan to fly Masters. 
> > 
> > 
> > 
> > Thanks, Rich 
> > ===================================== 
> > # To be removed from this list, go to 
> > http://www.nsrca.org/discussionA.htm 
> > and follow the instructions. 
> > 
> > 
> 
> 
> 
> 
> 
> __________________________________ 
> Do you Yahoo!? 
> New and Improved Yahoo! Mail - 100MB free storage! 
> http://promotions.yahoo.com/new_mail 
> ===================================== 
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm 
> and follow the instructions. 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040815/1bfe57ea/attachment.html