New engine prep

[Brian Young]

I pop off the back cover for a quick look. I check screws to be sure theyre not loose. Its  quick and easy to do.

"Fletcher, Richard" <Richard.Fletcher at gs.com> wrote:Does anyone clean new engines before running them? In years past I used to
always disassemble new engines before running them. And I once actually did
find some machining debris in the case of a Super Tigre. I once read in a
pylon column that the author even removed the bearings and soaked and
cleaned each part on alcohol and then re-assembled the engine before
running. And we were cautioned to never turn over an engine before going
through this procedure. I am a loyal OS fan and I have found that their
quality control is so good that these procedures are not necessary. Anyone
have any problems with brand new OS 160s?



Thanks, Rich
=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040813/7c4e0b6e/attachment.html