Another Webra Question

[Jerry Budd]

>Can someone tell me which way to turn the fuel pump adjustment screw 
>to increase or decrease the pump pressure on a Webra 1.45? Given my 
>needle setting is a little over 1 turn out I thing I should reduce 
>pump pressure. I have installed my bladder tank and I'm going to 
>give it another try this weekend. I installed new bearings and 
>tested the pump. When I disassembled the motor I found the head 
>bolts were not very tight, not sure if this could have been some of 
>my trouble.
>
>I'll give you all a full report Friday if the weather permits a test flight!
>
>--Gordon

In, or clockwise, to increase the pressure.  Opposite to decrease.

Good luck!

Jerry
-- 
___________
Jerry Budd
mailto:jbudd at qnet.com
=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.