2005 masters rev knife edge

[Mike Hester]

Ok thanks guys, I'm not crazy after all.

Well yes I am, but at least not about this =)

-Mike

  ----- Original Message ----- 
  From: Brian Young 
  To: discussion at nsrca.org 
  Sent: Saturday, August 07, 2004 2:43 PM
  Subject: Re: 2005 masters rev knife edge


  Yep, you have it right. Had the same discussion here a few weeks back.

  Mike Hester <kerlock at comcast.net> wrote: 
    Ok, let me see if I can get this straight.

    In the reverse knife edge, let's say the plane is traveling right to left. It rotates 90 deg to the left into knife edge flight, and holds with the canopy facing you. 

    NOW for teh reverse portion, does this mean that the plane must be rotated back to the RIGHT, going back through upright and ending with the bottom facing you? Or can it be rolled to the left again? 

    Also the 1/4-1/2-1/4 roll, I'm guessing all has to be in the same direction as well?

    Thanks guys, 
    -Mike
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040807/20ed1134/attachment.html