Creative Nose Ring Mounting?

[John Ferrell]

That may be where the idea came from. I fly with Lee Davis & try to keep up
with what they are doing.
John Ferrell
http://DixieNC.US

----- Original Message ----- 
From: "Anthony Romano" <anthonyr105 at hotmail.com>
To: <discussion at nsrca.org>
Sent: Sunday, August 01, 2004 2:13 PM
Subject: Re: Creative Nose Ring Mounting?


>
> Never tried but the a variation on the foam cup idea is in Piedmonts
> instructions for the Focus. They used two crossed pieces of 1/32" ply.
>
> Anthony
>
> >From: Norman Ellis <nxmxellis at yahoo.com>
> >Reply-To: discussion at nsrca.org
> >To: discussion at nsrca.org
> >Subject: Re: Creative Nose Ring Mounting?
> >Date: Sat, 31 Jul 2004 11:16:36 -0700 (PDT)
> >
> >This is in the idea category, not solution since I
> >haven't done it yet. I've been thinking of a tripod or
> >tetrapod of CF tubes, 4-40 studs black CAed into the
> >ends, aluminum tube collar at each end to discourage
> >splitting; nose-ring mounting plate nibbled out from
> >light gauge aluminum sheet, which is cut to triangular
> >or square outline, with tabs at the corners or apices,
> >tabs bent  perpendicular to the axis of the tube,
> >drilled out for the 4-40 studs to slip through,
> >fastened with nuts & lockwashers.
> >
> >Firewall anchor points would be tee-nuts fastened to
> >small (maybe 5/8" square) piece of plywood, plywood
> >epoxied to sort of a shim/foot piece of probably pine,
> >cut from end of a 5/8" sq stick, angle cut to match
> >axis of CF tube to firewall.  Probably mix cabosil
> >into epoxy when fixing feet to firewall, just to keep
> >it from creeping out while curing. Maybe tack in a
> >couple brads to keep the feet from spreading.
> >
> >Trouble with putting this on an ARF is it would be a
> >lot easier to do with a loose firewall before it's
> >mounted on the model. I suppose you could jig up the
> >fuselage to fix the firewall in a horizontal plane.
> >That begins to sound like a lot of work. I'd like to
> >know if a simpler solution is available. --Norm Ellis
> >
> >
> > > From: Bob Pastorello
> > > To: NSRCA
> > > Sent: Friday, July 30, 2004 11:03 PM
> > > Subject: Creative Nose Ring Mounting?
> > >
> > >
> > > Hoping there's someone out here with a creative
> > > solution to a pesky
> > > problem.... on my own rotational mount, with the OS
> > > 1.60, I think I need to install a
> > > nose ring....Arresti is a "cowling" nose, so can't
> > > go there....don't want to
> > > replace cowling with built up wooden assy.
> > >     Any ideas for making some kind of tripod/post
> > > affair that would attach to
> > > the firewall ( I have area of firewall around the
> > > mount that is accessible on
> > > all sides) to mount the nose ring to???
> > >
> > > Any ideas or solutions would be much appreciated!
> > >
> >
> >
> >__________________________________________________
> >Do You Yahoo!?
> >Tired of spam?  Yahoo! Mail has the best spam protection around
> >http://mail.yahoo.com
> >=====================================
> ># To be removed from this list, go to
http://www.nsrca.org/discussionA.htm
> >and follow the instructions.
> >
>
> _________________________________________________________________
> Planning a family vacation? Check out the MSN Family Travel guide!
> http://dollar.msn.com
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>


=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.