Honeycomb

[Lamar Blair]

Hi Ed

Check this out and see if this is what you are looking for.
http://home.att.net/~rc-enterprises/rcme_011.htm

Lamar Blair
RC Model Enterprises
256-351-8445
  ----- Original Message ----- 
  From: Ed Deaver 
  To: discussion at nsrca.org 
  Sent: Wednesday, April 21, 2004 9:54 PM
  Subject: Re: Honeycomb


  Hey Gray.  I was wanting the easy way, small usable sheets already made.  Somewhere around 2ftx 1ft or so.

  Thanx  ed

  Gray E Fowler <gfowler at raytheon.com> wrote:

    Ed 

    Do you mean just honeycomb (the stuff in the middle) or do you mean honeycomb A-sandwich panels(complete)? The honeycomb itself is made by Hexcel, but there is a place in Dallas that sells small sheets, and you can get  sheets of it from CST Sales and Fiberglast. You can make your own with a sheet of glass...



    Gray Fowler
    Principal Chemical Engineer
    Composites Engineering 


         Ed Deaver <divesplat at yahoo.com> 
          Sent by: discussion-request at nsrca.org 
          04/20/2004 07:13 PM 
          Please respond to discussion 

                 
                  To:        NSRCA Disscussion <discussion at nsrca.org> 
                  cc:         
                  Subject:        Honeycomb 



    Is there a US supplier for the honeycomb that PL products uses on its planes?  It really is much lighter than Liteply. 
    Thanx 

     

    ed 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040422/07709402/attachment.html