Remote Glow Question

[jzeigenfus at comcast.net]

Thanks Ed, I'm not sure what a 140 sleeve is though. I take it a tool that fits that hole nicely. JEZ
> The seating area where the glow plug washer seats ( both ) and around the
> combustion chamber, the flat area where the head gaskets sit. To do that
> area, take a 140 sleeve, glue 320 paper to the top, cut all around the
> outside edge and lap the head with it.
> With all the people that claim to be using the Mintor or the Mintor head on
> an OS, you would think someone would have run into this already, apparently
> not which makes me suspicious of all the BS I read here on the list.
> Any questions, call me at 845-223-5459
> Ed.
> 
> ----- Original Message ----- 
> From: <jzeigenfus at comcast.net>
> To: <discussion at nsrca.org>
> Sent: Monday, April 19, 2004 10:09 AM
> Subject: Re: Remote Glow Question
> 
> 
> > Ed, I am having the same problem with the Mintor head. What exactly did
> you have to scrath off. I couldn't get contact either on the lug. JEZ
> >
> > =====================================
> > # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> 

> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.