Radio South Stiff TX Springs

[Tony Stillman]

Ron:

You can either run the screw down on the tensioner, or cut two or three
coils off of the spring and re-bend the end.

Tony Stillman
Radio South
3702 N. Pace Blvd.
Pensacola, FL 32505
1-800-962-7802
www.radiosouthrc.com
----- Original Message ----- 
From: "Ron Sonderegger" <ronsond at erols.com>
To: "NSRCA-Discussion List" <discussion at nsrca.org>
Sent: Saturday, April 17, 2004 5:34 PM
Subject: Radio South Stiff TX Springs


> Does Radio South make stiff springs specifically for the Futaba 9C TX?
> The RS stiff springs I had in my Futaba 8 TX are too long for the new 9C
> TX.  The Futaba 9C's TX factory springs are about 40% shorter than those
> in the Futaba 8 TX.  ------- Ron
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>
>


=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.