Fw: Trim Question
Dan Curtis
warrior523 at mchsi.com
Sun Apr 18 13:52:41 AKDT 2004
-----
Subject: Re: Trim Question
> Guys, thanks for the responses so far. In my haste or forgetfullness I
did
> not mention that I had been trying the diffential thing with little to no
> help. On axial rolls in tracks very well, doing the reverse cuban on both
> ends it holds line very well. Bob P. , I have thought about the fact that
I
> must be getting some elevator in the roll to knife or not getting off of
it
> soon enough and I can't rule that out except I am mode 1 and have done the
> roll to knife edge using aileron stick only just to observe it pulling to
> the canopy. I am going to be moving the cg back some and see the effect.
> As for as differential goes, I am going to kind of start over on that one
> and set all deflections equal and move cg and start again. The plane does
> have a counter balance on the rudder, Troy. Aileron rolls to inverted
don't
> seem to be having a problem either, its when you do a slow aileron
movement
> to knife edge that it shows up.
>
>
> Again thanks for the help so far it is appreciated.
>
> Dan
>
>
>
=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.
More information about the NSRCA-discussion
mailing list