ES Composite Pipe Repair

[Roberto Estrada]

Here in Mexico we make this with plastiacero devcon, it's a epoxic adhesive with steel load that resist high temperature. Look at http://www.itwpolymex.com/english/devconplastiacero.html

You must sand surface very good and may be make some holes to aluminum tube for resin to lock in.

Hope help you

Roberto Estrada
  ----- Original Message ----- 
  From: Chuck Czarnik 
  To: discussion at nsrca.org 
  Sent: Tuesday, September 23, 2003 10:30 AM
  Subject: ES Composite Pipe Repair


  I have one of these pipes with a damaged inlet.  I found an aluminum tube that fit inside the inlet almost perfectly and tried to JB weld it in and clamp from the outside.  That lasted about 15-20 flights, and now it leaks like crazy.  Is there any kind of epoxy or other sealant (e.g. high temp silicone) that will hold up better to the heat?  Pipe is used with a YS 140, so it gets pretty hot.  I hate to let this pipe go just yet.  Any help appreciated!  Chuck





-----------------------------
NOTICE:  The information contained in this electronic mail message

is either attorney privileged and/or confidential information intended
only for the use of the individual or agent responsible to deliver
it to the intended recipient; or, alternately, proprietary information
(trade secret).  You are hereby notified that any dissemination,

distribution or copying of this communication or unauthorized use of the

information herein contained, is strictly prohibited. If you have

received this communication in error, please immediately delete it

from your computer and notify the sender of your receipt of this message. 

 
Estimado Cliente, su mensaje ha sido revisado por el servidor de anti-virus,
si ha recibido una alerta de mensaje con password, mensaje encriptado, o bien,
su mensaje contiene un archivo encriptado o no pudo ser verificado por el
servidor de anti-virus, le recomendamos tomar sus precauciones, la apertura
de estos mensajes queda bajo su responsabilidad, si no recibio la alerta,
no se encontro registro de virus hasta ahora conocidos.
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030923/a6c66083/attachment.html