ES Composite Pipe Repair

Wayne Galligan wgalligan at goodsonacura.com
Tue Sep 23 07:33:36 AKDT 2003


Hopefully Gray Fowler will see this post.  He repaired my pipe by using a piece of 7/8" aluminum wing tub and used a special high temp epoxy and some fiberglass.  Has held up well all year.

Wayne G.
  ----- Original Message ----- 
  From: Chuck Czarnik 
  To: discussion at nsrca.org 
  Sent: Tuesday, September 23, 2003 10:30 AM
  Subject: ES Composite Pipe Repair


  I have one of these pipes with a damaged inlet.  I found an aluminum tube that fit inside the inlet almost perfectly and tried to JB weld it in and clamp from the outside.  That lasted about 15-20 flights, and now it leaks like crazy.  Is there any kind of epoxy or other sealant (e.g. high temp silicone) that will hold up better to the heat?  Pipe is used with a YS 140, so it gets pretty hot.  I hate to let this pipe go just yet.  Any help appreciated!  Chuck





-----------------------------
NOTICE:  The information contained in this electronic mail message 
is either attorney privileged and/or confidential information intended
only for the use of the individual or agent responsible to deliver
it to the intended recipient; or, alternately, proprietary information
(trade secret).  You are hereby notified that any dissemination, 
distribution or copying of this communication or unauthorized use of the 
information herein contained, is strictly prohibited. If you have 
received this communication in error, please immediately delete it 
from your computer and notify the sender of your receipt of this message.  
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030923/0ca9d313/attachment.html


More information about the NSRCA-discussion mailing list