Jekyll CG problem still exists

[Jerry Stebbins]

Dave, our Fuse plans for a Jekyll 91 show the CG as 7 1/8 in. from the LE .
This checks on the wing drawing at the panel root, and is at the front edge
of the wing tube. The panel root is 15 3/4 in.on the drawing, as a check to
make sure what wing you have.
Hope this helps
Jerry
RC Model Enterprises
----- Original Message -----
From: "David Gundling" <DGundling at compuserve.com>
To: "NSRCA Discussion" <discussion at nsrca.org>
Sent: Sunday, September 07, 2003 9:47 PM
Subject: Jekyll CG problem still exists


Used a Golberg CG machine to check the CG on my used Jekyll.
It comes out at 6.25 inches forward of the trailing edge. (7.75 inches aft
of the leading edge at the wing root or at 44% of the MAC)
Is this too far aft? If so how much further forward do I need to move it?

Thanks.

Dave
============# To be removed from this list, send a message to
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#




=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#