YS 140FZ Help

[Henderson,Eric]

Larry,
       Did you notice the different plumbing on the Sport?.  Looks like it is back to the pressure tap at the front again. Pictures in the ad's of the sport appear to be the old L.

E.

-----Original Message-----
From: discussion-request at nsrca.org
[mailto:discussion-request at nsrca.org]On Behalf Of Hotrod34a at aol.com
Sent: Wednesday, September 03, 2003 12:54 PM
To: discussion at nsrca.org
Subject: Re: YS 140FZ Help


Ron,
  I have a new 140 Sport that I am in the process of breaking in and I am experiencing the same thing as you are, very rich idle.  I have backed out the lo end adjustment to about 2 1/2 turns so far and it is still to rich.  My main needle valve is open 1 5/8 turns at this point, but keeping it on the rich side until fully broken in.  I have ran a little over a half gallon through it so far and the idle and transition is improving, but still rich.  Guess I will open the lo end adjustment a little more before I start adjusting the regulator, as I find this as a last resort.  Keep me posted as to your progress and I will do the same, Larry M.
=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#

==================# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#