Angel's Shadow - RIP

Lance Van Nostrand patterndude at comcast.net
Tue Oct 28 19:08:01 AKST 2003


The upper and lower skins are butt glued.  This is not intrinsic to the
technology.  Rev Pro is the same.  A balsa leading edge is needed, or like a
pylon racer, the LE needs to be sharper so it can be filled with epoxy.
--Lance

----- Original Message ----- 
From: "Atwood, Mark" <atwoodm at paragon-inc.com>
To: <discussion at nsrca.org>
Sent: Tuesday, October 28, 2003 7:29 PM
Subject: RE: Angel's Shadow - RIP


You're probably right.  I haven't raced in years, and when I did it was
quickie and locally.  But I have a few of the composite racers and they're
very light and VERY strong.  My point was simply that the technology is not
terribly new, and has been well proven in many other applications...so I'm
guessing...just guessing that there is a design or manufacturing flaw,
rather than something intrinsic to the technology.

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#



More information about the NSRCA-discussion mailing list