Starter (kavan)

Ihncheol Park PatternFlyer at msn.com
Sun Nov 30 23:20:14 AKST 2003


Well, I have a Soft insert from Kavan.  I just don't like it much.

It does not fit tight enough on the starter.  It actually sticks to the Tru
Turn Spinner cone much more than to the starter itself.   If you are going
to use the starter for small Jet (Ultimate)style, I suggest you try the
Miller's. I have a few small planes using 2.25" spinners, so I have to
remove the cone to reverse it.

If you don't plan on removing the insert for smaller spinner try with
silicone to hold the Kavan soft insert to the starter.  Tried CA, but didn't
last more than a day.

Ihncheol
-----Original Message-----
From: discussion-request at nsrca.org
[mailto:discussion-request at nsrca.org]On Behalf Of Ron Van Putte
Sent: Sunday, November 30, 2003 9:26 PM
To: discussion at nsrca.org
Subject: Re: Starter (kavan)



On Nov 30, 2003, at 5:49 PM, Bill Pritchett wrote:

> Reeeaaallllyyyyyy........  couldn't find a different insert on the B&P
> site...... guess I'll check with Kavan.
>

Look in the Hobby Lobby catalog or on their website:
http://www.hobby-lobby.com/

Ron Van Putte


>
> ----- Original Message -----
> From: "Koenig, Tom" <Tom.Koenig at actewagl.com.au>
> To: <discussion at nsrca.org>
> Sent: Sunday, November 30, 2003 6:25 PM
> Subject: RE: Starter (kavan)
>
>
>>
>> Bill & others,
>>
>> Kavan actually makes a 'soft' insert which does not slip. It is
>> available
>> separately.
>> It beats me why they dont make this as the 'default' insert.
>>
>>
>> Tom
>>
>>> ----------
>>> From: Bill Pritchett[SMTP:phelps15 at comcast.net]
>>> Reply To: discussion at nsrca.org
>>> Sent: Monday, 1 December 2003 9:52
>>> To: discussion at nsrca.org
>>> Subject: Re: Starter
>>>
>>> Thanks to all!
>>> Bill
>>>
>>>
>>> ----- Original Message -----
>>> From: mdarr00 at comcast.net
>>> To: discussion at nsrca.org
>>> Sent: Sunday, November 30, 2003 5:16 PM
>>> Subject: Re: Starter
>>>
>>> Bill, I believe what you are looking for is the starter cone made by
>>> Miller.  It is blue and is a soft silicone.  The Miller p/n is K SG
>>> 201.
>>>
>>> Mike Darr
>>>
>>> ----- Original Message -----
>>> From: Bill Pritchett
>>> To: discussion at nsrca.org
>>> Sent: Sunday, November 30, 2003 4:34 PM
>>> Subject: Re: Starter
>>>
>>> Xavier:
>>> If that motor is like my Webra, you will need a different
>>> insert for the starter cone.......the stock Kavan insert really
>>> likes to
>>> slip on the FAI Tru-Turns...... have seen them, but not sure who
>>> makes
>>> them.  More of a "silicon" feel to them.  Anyone know what I'm
>>> talking
>>> about??
>>> Thanks.
>>> Bill
>>>
>>> ----- Original Message -----
>>> From: Xavier Mouraux
>>> To: discussion at nsrca.org
>>> Sent: Sunday, November 30, 2003 4:26 PM
>>> Subject: Re: Starter
>>>
>>> That's it. With the name, I was able to found it at
>>> Central. I didn't tough looking into "electrical" for a starter :-)
>>>
>>> Thanks Don
>>>
>>> Xavier
>>>
>>> ----- Original Message -----
>>> From: AtwoodDon at aol.com
>>> To: discussion at nsrca.org
>>> Sent: Sunday, November 30, 2003 4:13 PM
>>> Subject: Re: Starter
>>>
>>> In a message dated 11/30/2003 1:07:36 PM Pacific
>>> Standard Time, xavier.mouraux at sympatico.ca writes:
>>>
>>> Hello Guys,
>>>
>>> I am making a list of stuff to buy for next season
>>> and I would like to have suggestions for a starter that would easily
> turn
>>> a OS160FX. I have seen and borrowed those small black starter with
> gearbox
>>> many time but can't found the name for it.
>>>
>>> Thanks
>>>
>>> Xavier
>>>
>>> It's probably a Kavan starter.
>>>
>>> Don
>>>
>>>
>>
>> **********************************************************************
>> **
>> *PLEASE NOTE*  This email and any attachments may
>> be confidential. If received in error, please delete all
>> copies and advise the sender. The reproduction or
>> dissemination of this email or its attachments is
>> prohibited without the consent of the sender.
>>
>> WARNING RE VIRUSES:  Our computer systems sweep
>> outgoing email to guard against viruses, but no warranty
>> is given that this email or its attachments are virus free.
>> Before opening or using attachments, please check for
>> viruses.  Our liability is limited to the re-supply of any
>> affected attachments.
>>
>> Any views expressed in this message are those of the
>> individual sender, except where the sender expressly,
>> and with authority, states them to be the views of the
>> organisation.
>> **********************************************************************
>> **
>> =====================================
>> # To be removed from this list, send a message to
>> # discussion-request at nsrca.org
>> # and put leave discussion on the first line of the body.
>> #
>>
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>

=====================================
# To be removed from this list, send a message to
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#


=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#



More information about the NSRCA-discussion mailing list