Starter (kavan)

[Bill Pritchett]

Thanks, Bob.... I will check with Tower.
Bill

----- Original Message ----- 
From: "Bob Pastorello" <rcaerobob at cox.net>
To: <discussion at nsrca.org>
Sent: Sunday, November 30, 2003 7:23 PM
Subject: Re: Starter (kavan)


> Should have clarified; Tower carries the Blue Miller...can't remember the
> number, but they have pics to show it.
>
> Bob Pastorello, Oklahoma
> NSRCA 199, AMA 46373
> rcaerobob at cox.net
> www.rcaerobats.net
>
>
> ----- Original Message ----- 
> From: "Bob Pastorello" <rcaerobob at cox.net>
> To: <discussion at nsrca.org>
> Sent: Sunday, November 30, 2003 6:21 PM
> Subject: Re: Starter (kavan)
>
>
> > Tower also carries a blue one, but it didn't fit as snugly in the cone
as
> > I'd like, so I used silicone RTV....it has stayed put, and easily starts
> my
> > OS 1.60's and Mintor 1.70....I use a self-made 14.4 v. 2000mah NiCad.
> Spins
> > it right up there!
> >
> > Bob Pastorello, Oklahoma
> > NSRCA 199, AMA 46373
> > rcaerobob at cox.net
> > www.rcaerobats.net
> >
> >
> > ----- Original Message ----- 
> > From: "Koenig, Tom" <Tom.Koenig at actewagl.com.au>
> > To: <discussion at nsrca.org>
> > Sent: Sunday, November 30, 2003 6:09 PM
> > Subject: RE: Starter (kavan)
> >
> >
> > >
> > > yep ..they sure do ..I have three spares at home. They were only about
> $5
> > > Australian, so I stocked up!
> > >
> > > I'll get the part number for you if you like. It will have to be
> tomorrow
> > > though as I am at work at present.
> > >
> > > Tom
> > >
> > > > ----------
> > > > From: Bill Pritchett[SMTP:phelps15 at comcast.net]
> > > > Reply To: discussion at nsrca.org
> > > > Sent: Monday, 1 December 2003 10:49
> > > > To: discussion at nsrca.org
> > > > Subject: Re: Starter (kavan)
> > > >
> > > > Reeeaaallllyyyyyy........  couldn't find a different insert on the
B&P
> > > > site...... guess I'll check with Kavan.
> > > > Bill
> > > >
> > > > ----- Original Message ----- 
> > > > From: "Koenig, Tom" <Tom.Koenig at actewagl.com.au>
> > > > To: <discussion at nsrca.org>
> > > > Sent: Sunday, November 30, 2003 6:25 PM
> > > > Subject: RE: Starter (kavan)
> > > >
> > > >
> > > > >
> > > > > Bill & others,
> > > > >
> > > > > Kavan actually makes a 'soft' insert which does not slip. It is
> > > > available
> > > > > separately.
> > > > > It beats me why they dont make this as the 'default' insert.
> > > > >
> > > > >
> > > > > Tom
> > > > >
> > > > > > ----------
> > > > > > From: Bill Pritchett[SMTP:phelps15 at comcast.net]
> > > > > > Reply To: discussion at nsrca.org
> > > > > > Sent: Monday, 1 December 2003 9:52
> > > > > > To: discussion at nsrca.org
> > > > > > Subject: Re: Starter
> > > > > >
> > > > > > Thanks to all!
> > > > > > Bill
> > > > > >
> > > > > >
> > > > > > ----- Original Message ----- 
> > > > > > From: mdarr00 at comcast.net
> > > > > > To: discussion at nsrca.org
> > > > > > Sent: Sunday, November 30, 2003 5:16 PM
> > > > > > Subject: Re: Starter
> > > > > >
> > > > > > Bill, I believe what you are looking for is the starter cone
made
> by
> > > > > > Miller.  It is blue and is a soft silicone.  The Miller p/n is K
> SG
> > > > 201.
> > > > > >
> > > > > > Mike Darr
> > > > > >
> > > > > > ----- Original Message ----- 
> > > > > > From: Bill Pritchett
> > > > > > To: discussion at nsrca.org
> > > > > > Sent: Sunday, November 30, 2003 4:34 PM
> > > > > > Subject: Re: Starter
> > > > > >
> > > > > > Xavier:
> > > > > > If that motor is like my Webra, you will need a different
> > > > > > insert for the starter cone.......the stock Kavan insert really
> > likes
> > > > to
> > > > > > slip on the FAI Tru-Turns...... have seen them, but not sure who
> > makes
> > > > > > them.  More of a "silicon" feel to them.  Anyone know what I'm
> > talking
> > > > > > about??
> > > > > > Thanks.
> > > > > > Bill
> > > > > >
> > > > > > ----- Original Message ----- 
> > > > > > From: Xavier Mouraux
> > > > > > To: discussion at nsrca.org
> > > > > > Sent: Sunday, November 30, 2003 4:26 PM
> > > > > > Subject: Re: Starter
> > > > > >
> > > > > > That's it. With the name, I was able to found it at
> > > > > > Central. I didn't tough looking into "electrical" for a starter
> :-)
> > > > > >
> > > > > > Thanks Don
> > > > > >
> > > > > > Xavier
> > > > > >
> > > > > > ----- Original Message ----- 
> > > > > > From: AtwoodDon at aol.com
> > > > > > To: discussion at nsrca.org
> > > > > > Sent: Sunday, November 30, 2003 4:13 PM
> > > > > > Subject: Re: Starter
> > > > > >
> > > > > > In a message dated 11/30/2003 1:07:36 PM Pacific
> > > > > > Standard Time, xavier.mouraux at sympatico.ca writes:
> > > > > >
> > > > > > Hello Guys,
> > > > > >
> > > > > > I am making a list of stuff to buy for next season
> > > > > > and I would like to have suggestions for a starter that would
> easily
> > > > turn
> > > > > > a OS160FX. I have seen and borrowed those small black starter
with
> > > > gearbox
> > > > > > many time but can't found the name for it.
> > > > > >
> > > > > > Thanks
> > > > > >
> > > > > > Xavier
> > > > > >
> > > > > > It's probably a Kavan starter.
> > > > > >
> > > > > > Don
> > > > > >
> > > > > >
> > > > >
> > > > >
> > ************************************************************************
> > > > > *PLEASE NOTE*  This email and any attachments may
> > > > > be confidential. If received in error, please delete all
> > > > > copies and advise the sender. The reproduction or
> > > > > dissemination of this email or its attachments is
> > > > > prohibited without the consent of the sender.
> > > > >
> > > > > WARNING RE VIRUSES:  Our computer systems sweep
> > > > > outgoing email to guard against viruses, but no warranty
> > > > > is given that this email or its attachments are virus free.
> > > > > Before opening or using attachments, please check for
> > > > > viruses.  Our liability is limited to the re-supply of any
> > > > > affected attachments.
> > > > >
> > > > > Any views expressed in this message are those of the
> > > > > individual sender, except where the sender expressly,
> > > > > and with authority, states them to be the views of the
> > > > > organisation.
> > > > >
> > ************************************************************************
> > > > > =====================================
> > > > > # To be removed from this list, send a message to
> > > > > # discussion-request at nsrca.org
> > > > > # and put leave discussion on the first line of the body.
> > > > > #
> > > > >
> > > >
> > > > =====================================
> > > > # To be removed from this list, send a message to
> > > > # discussion-request at nsrca.org
> > > > # and put leave discussion on the first line of the body.
> > > > #
> > > >
> > > >
> > >
> > >
************************************************************************
> > > *PLEASE NOTE*  This email and any attachments may
> > > be confidential. If received in error, please delete all
> > > copies and advise the sender. The reproduction or
> > > dissemination of this email or its attachments is
> > > prohibited without the consent of the sender.
> > >
> > > WARNING RE VIRUSES:  Our computer systems sweep
> > > outgoing email to guard against viruses, but no warranty
> > > is given that this email or its attachments are virus free.
> > > Before opening or using attachments, please check for
> > > viruses.  Our liability is limited to the re-supply of any
> > > affected attachments.
> > >
> > > Any views expressed in this message are those of the
> > > individual sender, except where the sender expressly,
> > > and with authority, states them to be the views of the
> > > organisation.
> > >
************************************************************************
> > > =====================================
> > > # To be removed from this list, send a message to
> > > # discussion-request at nsrca.org
> > > # and put leave discussion on the first line of the body.
> > > #
> > >
> >
> > =====================================
> > # To be removed from this list, send a message to
> > # discussion-request at nsrca.org
> > # and put leave discussion on the first line of the body.
> > #
> >
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#