Starter (kavan)

[Tony Quist]

I used acetone to clean my cone and it does not slip anymore.

Tony

-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
On Behalf Of Bill Pritchett
Sent: Sunday, November 30, 2003 3:49 PM
To: discussion at nsrca.org
Subject: Re: Starter (kavan)

Reeeaaallllyyyyyy........  couldn't find a different insert on the B&P
site...... guess I'll check with Kavan.
Bill

----- Original Message ----- 
From: "Koenig, Tom" <Tom.Koenig at actewagl.com.au>
To: <discussion at nsrca.org>
Sent: Sunday, November 30, 2003 6:25 PM
Subject: RE: Starter (kavan)


>
> Bill & others,
>
> Kavan actually makes a 'soft' insert which does not slip. It is
available
> separately.
> It beats me why they dont make this as the 'default' insert.
>
>
> Tom
>
> > ----------
> > From: Bill Pritchett[SMTP:phelps15 at comcast.net]
> > Reply To: discussion at nsrca.org
> > Sent: Monday, 1 December 2003 9:52
> > To: discussion at nsrca.org
> > Subject: Re: Starter
> >
> > Thanks to all!
> > Bill
> >
> >
> > ----- Original Message ----- 
> > From: mdarr00 at comcast.net
> > To: discussion at nsrca.org
> > Sent: Sunday, November 30, 2003 5:16 PM
> > Subject: Re: Starter
> >
> > Bill, I believe what you are looking for is the starter cone made by
> > Miller.  It is blue and is a soft silicone.  The Miller p/n is K SG
201.
> >
> > Mike Darr
> >
> > ----- Original Message ----- 
> > From: Bill Pritchett
> > To: discussion at nsrca.org
> > Sent: Sunday, November 30, 2003 4:34 PM
> > Subject: Re: Starter
> >
> > Xavier:
> > If that motor is like my Webra, you will need a different
> > insert for the starter cone.......the stock Kavan insert really
likes to
> > slip on the FAI Tru-Turns...... have seen them, but not sure who
makes
> > them.  More of a "silicon" feel to them.  Anyone know what I'm
talking
> > about??
> > Thanks.
> > Bill
> >
> > ----- Original Message ----- 
> > From: Xavier Mouraux
> > To: discussion at nsrca.org
> > Sent: Sunday, November 30, 2003 4:26 PM
> > Subject: Re: Starter
> >
> > That's it. With the name, I was able to found it at
> > Central. I didn't tough looking into "electrical" for a starter :-)
> >
> > Thanks Don
> >
> > Xavier
> >
> > ----- Original Message ----- 
> > From: AtwoodDon at aol.com
> > To: discussion at nsrca.org
> > Sent: Sunday, November 30, 2003 4:13 PM
> > Subject: Re: Starter
> >
> > In a message dated 11/30/2003 1:07:36 PM Pacific
> > Standard Time, xavier.mouraux at sympatico.ca writes:
> >
> > Hello Guys,
> >
> > I am making a list of stuff to buy for next season
> > and I would like to have suggestions for a starter that would easily
turn
> > a OS160FX. I have seen and borrowed those small black starter with
gearbox
> > many time but can't found the name for it.
> >
> > Thanks
> >
> > Xavier
> >
> > It's probably a Kavan starter.
> >
> > Don
> >
> >
>
>
************************************************************************
> *PLEASE NOTE*  This email and any attachments may
> be confidential. If received in error, please delete all
> copies and advise the sender. The reproduction or
> dissemination of this email or its attachments is
> prohibited without the consent of the sender.
>
> WARNING RE VIRUSES:  Our computer systems sweep
> outgoing email to guard against viruses, but no warranty
> is given that this email or its attachments are virus free.
> Before opening or using attachments, please check for
> viruses.  Our liability is limited to the re-supply of any
> affected attachments.
>
> Any views expressed in this message are those of the
> individual sender, except where the sender expressly,
> and with authority, states them to be the views of the
> organisation.
>
************************************************************************
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#


=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#