sheeted foam core wing facing

[Wayne Galligan]

Be careful if using Pro-Bond for l.e. and facing.   If the edging is not held all along the surface well the urethane glue will push the material away from the bonded surface.  The urethane will expand as it cures.  BTDT....

Wayne G.
  ----- Original Message ----- 
  From: Bob Kane 
  To: discussion at nsrca.org 
  Sent: Wednesday, November 19, 2003 10:22 AM
  Subject: Re: sheeted foam core wing facing


  Tightbond is fine considering it is stronger than the foam and the balsa. Polyurethane would work well also.

  John Crozier <sjcrozier at comcast.net> wrote: 
    I'm ready to install the aileron/wing facing for hinging on my Widebody 60.
    I used Titebond for the leading edge and tips.
    Is Tightbond strong enough for the hinge facing, or should I use epoxy?
    thanx...croz

    =====================================
    # To be removed from this list, send a message to 
    # discussion-request at nsrca.org
    # and put leave discussion on the first line of the body.
    #



  Bob Kane
  getterflash at yahoo.com


------------------------------------------------------------------------------
  Do you Yahoo!?
  Protect your identity with Yahoo! Mail AddressGuard
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20031119/cb258271/attachment.html