Question on building a Temptation

[Wayne Galligan]

If you don't have c.f. available to you. I have used 1/4 endgrain balsa with
1/64 ply on both sides with very good results also(gives more gluing
surface).   It is important that you use a piece of  ply behind this type of
fire wall to hold the blind nuts.  I just make a t-plate to hold all three.
That way you can oversize the holes in the firewall and you are able to move
the mount for thrust adjustment.

Wayne G.

----- Original Message ----- 
From: "Reeves" <reeves at mtaonline.net>
To: <discussion at nsrca.org>
Sent: Friday, November 14, 2003 7:48 AM
Subject: Re: Question on building a Temptation


> Hi Jon, Get wih me and I'll give you the carbon, end grained balsa 1/4"
> thick  which is perfect for this. Reeves.
> ----- Original Message ----- 
> From: "JonAlan Wise" <wise at alaskalife.net>
> To: <discussion at nsrca.org>
> Sent: Thursday, November 13, 2003 9:37 PM
> Subject: Question on building a Temptation
>
>
> >
> > What size ply should I use for the firewall. The drawings that come with
> > the plane show the firewall but don`t suggest a thickness for it. I`m
> > using a Hyde mount with the nose ring glued in the nose of the plane.
> > Thanks Jon
> >
> > =====================================
> > # To be removed from this list, send a message to
> > # discussion-request at nsrca.org
> > # and put leave discussion on the first line of the body.
> > #
> >
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>
>


=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#