ZN Majestic Wing Section

[Brian Billings]

No problem Paul, just Email it off list to auto7832 at bellsouth.net and I will get them for you.
  ----- Original Message ----- 
  From: Paul Hepworth 
  To: discussion at nsrca.org 
  Sent: Thursday, November 13, 2003 8:36 PM
  Subject: Re: ZN Majestic Wing Section






  Many thanks I don't have a Fax but I am working on a pic I can e mail to you and I will set it up so that you can send it in a simple text e mail.

  All the best

      Paul Hepworth 



  >From: "Brian Billings" 
  >Reply-To: discussion at nsrca.org 
  >To: 
  >Subject: Re: ZN Majestic Wing Section 
  >Date: Tue, 11 Nov 2003 10:42:41 -0500 
  > 
  >Paul, I have one going together as we speak, the wing halfs are joined, 
  >leading edges and tips are on but the Ail. are not cut out yet. Same with 
  >the elev. halfs. If you tell me what you want measured I can get it for you. 
  >Better yet fax me a drawing depicting the wings and the points you want the 
  >dimentions of and I will fax it back to you, my fax number is 904-269-4727, 
  >there is also a sheet of CPLR's notes that came with the kit that explains 
  >the modifications he made. Hope this helps. Brian Billings 
  >----- Original Message ----- 
  >From: "Koenig, Tom" 
  >To: 
  >Sent: Monday, November 10, 2003 11:41 PM 
  >Subject: RE: ZN Majestic Wing Section 
  > 
  > 
  > > 
  > > Paul, 
  > > 
  > > I cant really help you...but....I was always under the impression that the 
  > > Majestic just had the same wing etc. I believe the ailerons etc were sized 
  > > up for the AA stuff, the fin is cut down to allow for the huge 
  > > conterbalance. 
  > > 
  > > I have a little Kyosho Majestic...but that will be no use to you. 
  > > 
  > > Maybe you could try ZN directly...but I doubt they will be much help other 
  > > than suggest you purchase a set of wings etc, but I may be wrong there, so 
  > > try your luck. 
  > > 
  > > If all else fails, I'd add a bit of span to the section you have, maybe 
  > > even a thicker % tip. Make the ailerons huge and run them further inboard. 
  > > Stab I'd increase in area too, mainly span and huge elevators. 
  > > 
  > > Try and find some pics and just take a guess if nothing else turns up. 
  > > 
  > > Goodluck 
  > > 
  > > Tom 
  > > 
  > > > ---------- 
  > > > From: Paul Hepworth[SMTP:paulhepworth at hotmail.com] 
  > > > Reply To: discussion at nsrca.org 
  > > > Sent: Saturday, 8 November 2003 4:55 
  > > > To: discussion at nsrca.org 
  > > > Subject: ZN Majestic Wing Section 
  > > > 
  > > > Can any one tell me what the wing section for the ZN Majestic is and if 
  > > > any one has any detailed measurements of the wing, tail plane, rudder 
  >and 
  > > > the moment arm e.g. 
  > > > I have a Caprise kit that I have no use for pattern so I want to convert 
  > > > to a Majestic for Artistic Aerobatics. 
  > > > I have already built a wing and tail for the Caprise so I need a new set 
  > > > cut. 
  > > > I need to know the section so I can go into my data base on the CNC 
  >system 
  > > > for the best results. I am not sure if the tail is the some between the 
  > > > caprise and the majestic, looking at some pics the majestc is a 
  >different 
  > > > shap and size. 
  > > > 
  > > > 
  > > > All the best 
  > > > 
  > > > 
  > > > 
  > > > 
  > > > _____ 
  > > > 
  > > > Help STOP SPAM with the new MSN 8 and get 2 months FREE* 
  > > > 
  > > 
  > > ************************************************************************ 
  > > *PLEASE NOTE* This email and any attachments may 
  > > be confidential. If received in error, please delete all 
  > > copies and advise the sender. The reproduction or 
  > > dissemination of this email or its attachments is 
  > > prohibited without the consent of the sender. 
  > > 
  > > WARNING RE VIRUSES: Our computer systems sweep 
  > > outgoing email to guard against viruses, but no warranty 
  > > is given that this email or its attachments are virus free. 
  > > Before opening or using attachments, please check for 
  > > viruses. Our liability is limited to the re-supply of any 
  > > affected attachments. 
  > > 
  > > Any views expressed in this message are those of the 
  > > individual sender, except where the sender expressly, 
  > > and with authority, states them to be the views of the 
  > > organisation. 
  > > ************************************************************************ 
  > > ===================================== 
  > > # To be removed from this list, send a message to 
  > > # discussion-request at nsrca.org 
  > > # and put leave discussion on the first line of the body. 
  > > # 
  > > 
  > 
  > 
  >===================================== 
  ># To be removed from this list, send a message to 
  ># discussion-request at nsrca.org 
  ># and put leave discussion on the first line of the body. 
  ># 
  > 


------------------------------------------------------------------------------
  STOP MORE SPAM with the new MSN 8 and get 2 months FREE* 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20031114/e5f37d61/attachment.html