Mintor 1.7 - low cost engines

[Roberto Estrada]

Hi Tony, thank's for help.

What engine are this and what is included.

Do you accept mastercard? I'm in Mexico, so let me know about shipping.

Looking to your web site, may be I'll order some items more.

Roberto Estrada

----- Original Message -----
From: "Tony Stillman" <tony at radiosouthrc.com>
To: <discussion at nsrca.org>
Sent: Thursday, November 06, 2003 8:10 AM
Subject: Re: Mintor 1.7 - low cost engines


> You can purchase them from me at $259.00.
>
> Tony Stillman
> Radio South
> 3702 N. Pace Blvd.
> Pensacola, FL 32505
> 1-800-962-7802
> www.radiosouthrc.com
> ----- Original Message -----
> From: "Roberto Estrada" <macro at avantel.net>
> To: <discussion at nsrca.org>
> Sent: Wednesday, November 05, 2003 5:43 PM
> Subject: Re: Mintor 1.7 - low cost engines
>
>
> > Hi Chris, Webra is a great option, overall about cost for low
maintenance
> > and nitro.
> > Your planes are about 10lbs, mine will be about 10.5 to 11lbs, and I may
> see
> > over sea level too.
> > Can you tell me about your configuration, like header, pipe, prop and
rev
> > too?
> >
> > Tony post that Webra 145 are $259 now but I want to know where to buy at
> > this cost.
> >
> > Really thank's for help.
> >
> > Luis Roberto
> >
> > ----- Original Message -----
> > From: "White, Chris" <chris at ssd.fsi.com>
> > To: <discussion at nsrca.org>
> > Sent: Wednesday, November 05, 2003 7:20 AM
> > Subject: RE: Mintor 1.7 - low cost engines
> >
> >
> > > Hi Luis....Welcome.
> > > I too am a new member of NSRCA and understand your concern in cost of
> > > engines. I have no experience with the Mintor, but I am now running 2
> > Webra
> > > 145AAR's in 2 Zen 120 airframes which give me a cost close to the
price
> of
> > 1
> > > full blown pattern bird with a YS DZ.   I'm very happy with the
> > reliability
> > > of the Webra and the Zen flies better than anything I've flown. (over
30
> > yrs
> > > in R/C) I'm sure this ARF airframe will serve to improve my flying in
> the
> > > Intermediate class.   I have 87 runs on one Webra and the other one
has
> 2
> > > new out of the box with easy tuning.  Don't get me wrong, the YS is a
> > great
> > > engine, but I find the Webra is low maintenance, low vibration and a
> > > powerhouse (unlimited vertical on the 10lb airframe at 750' ASL on 15%
> > > nitro).  I have had one problem which zeroed a round for me, but it
was
> > > related to trash in the pump, and has not been repeated.
> > >
> > > Best of luck....
> > > Chris White
> > > Owasso, Oklahoma
> > >
> > > -----Original Message-----
> > > From: discussion-request at nsrca.org
> > > [mailto:discussion-request at nsrca.org]On Behalf Of Roberto Estrada
> > > Sent: Tuesday, November 04, 2003 6:37 PM
> > > To: discussion at nsrca.org
> > > Subject: Mintor 1.7
> > >
> > >
> > > Hi, I'm happy of be a NSRCA member (just one month a go) and is great
> look
> > > my name at K-factor (october). Hope can learn too much of you great
> > pilots.
> > > (sorry about my english)
> > >
> > > I want to know your opinion about the Mintor 1.7 with Mintor carbon
> pipe.
> > >
> > > I want to buy a very good engine for my first 2x2 pattern plane and
> really
> > > hope good performance.
> > >
> > > I'm looking to YS (too much money), Webra 1.45, OS 1.40 and OS 1.60
> (with
> > > some troubles for best performance I think, but the best in price)
> > >
> > > I'm in Mexico, and my club is about 7,500 fsl.
> > >
> > > Thank's for help.
> > >
> > > Luis Diaz
> > >
> > >
> > > =====================================
> > > # To be removed from this list, send a message to
> > > # discussion-request at nsrca.org
> > > # and put leave discussion on the first line of the body.
> > > #
> > > =====================================
> > > # To be removed from this list, send a message to
> > > # discussion-request at nsrca.org
> > > # and put leave discussion on the first line of the body.
> > > #
> > >
> >
> >
> > =====================================
> > # To be removed from this list, send a message to
> > # discussion-request at nsrca.org
> > # and put leave discussion on the first line of the body.
> > #
> >
> >
> >
>
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>


=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#