Mintor eyes only/Power wish list

[RUDDERCABL at aol.com]

In a message dated 5/29/2003 2:48:08 PM Eastern Standard Time, 
gene.maurice at attbi.com writes:


> OK, try this on for size OS160FX (< $250), Perry Regulator Pump ($27), KM 
> Header ($45), Mac's 15cc Quiet Pipe ($78), AFC SS double sealed bearing ($15), 
> total cost right at $400 INCLUDING exhaust system!! NOW the kicker: APC 
> 17x12 standard blade (read wide) 8300 RPM (APC 16.5x13 W turns about the same) on 
> Magnum 15%, idles at < 1800 RPM all day long, transitions almost "4 stroke 
> like". Though it has not been measured with a sound meter, I dont think over 
> the limit. If it is, a 17x13 or 17x14 would probably do the trick.
>  
> 

    Gene
Try an APC 15.75 X 13 three blade on the 1.60  . You may be pleasantly 
surprised !

Robert Gainey
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030529/aa1731e0/attachment.html