Hanger 9 Servo Wheels and JR servos

[Jon Uhler]

I bought a JR wheel as well that would not fit on a 8411.  It was stamped
with the "J".  I'd say H9 needs a bit of QA in place in their arm
department.
 
Jon

-----Original Message-----
From: Tony Stillman [mailto:tony at radiosouthrc.com]
Sent: Tuesday, May 27, 2003 8:06 AM
To: discussion at nsrca.org
Subject: Re: Hanger 9 Servo Wheels and JR servos


Steve:

Look VERY CLOSELY on the arm to see if there is an engraved "J" on it (for
JR).  It could be miss-packaged and for a different brand servo.
 
Tony Stillman
Radio South
3702 N. Pace Blvd.
Pensacola, FL 32505
1-800-962-7802
www.radiosouthrc.com <http://www.radiosouthrc.com> 

----- Original Message ----- 
From: RC Steve  <mailto:rcsteve at tcrcm.org> Sterling 
To: Discussion at Nsrca. Org <mailto:Discussion at Nsrca. Org>  
Sent: Monday, May 26, 2003 1:26 AM
Subject: Hanger 9 Servo Wheels and JR servos

I bought a Hanger 9 Rudder Servo Wheel to use with my JR 8411 digital servo.
Says fits JR servos on package.
 
Can't seem to get it on. Anybody know if this combination is supposed to
work, or did I mess up?
 
 


This transmission is intended only for the use of the addressee and may
contain information that is privileged, confidential, and exempt from
disclosure under applicable law. If you are not the intended recipient, or
the employee or agent responsible for delivering the message to the intended
recipient, this serves as notice to you that any dissemination,
distribution, or copying of this communication is strictly prohibited. If
you have received this communication in error please notify us immediately
via e-mail at the sender's e-mail address, delete this message from your
computer and/or computer network and destroy any hard copies that may have
been made. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030527/3259111a/attachment.html