3M / OS header O-ring size

[wgalligan]

If your still talking about the green A/C o-rings you can get those at most automotive stores off the shelf.  They usually come in a multi-size pack. 

Jim...  do you mean you need to support the pipe at the front and back?   I usually just use one Dave Brown hush mount just past the center of my pipe.  No support on the front end.  But I am useing a solid header on the OS.  But I plan on using the o-ring header that came with my Mintor 1.70.

Wayne
 
  ----- Original Message ----- 
  From: Del Rykert 
  To: discussion at nsrca.org 
  Sent: Saturday, May 24, 2003 4:50 AM
  Subject: Re: 3M / OS header O-ring size


  I take my old o ring with me and match it up with what they have in their cubby drawer with "O-rings".  

  Del

    ----- Original Message ----- 
    From: Woodward James R Civ 412 TW/DRP/ACQ 
    To: discussion at nsrca.org 
    Sent: Friday, May 23, 2003 10:10 AM
    Subject: 3M / OS header O-ring size


    Hi All,



    Does anyone have a part number or size that I can use to go to the hardware store and get some more of the rubber o-rings for the headers?



    I've found that if you don't support the pipe and header, they wear out fast!



    Thanks,

    Jim W.




-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030523/5a6d725c/attachment.html