Weghts

[Ed Miller]

Finally finished painting 3 new planes, Dave Funk's Hideaway, Lance Robbins Nomex Gator Giles and my EMC2. I only have weights for my EMC2 handy. Primer used was the old K&B Superpoxy primer, PPG base coat/clear coat 2 stage. We obtained the base coats from Tony Stillman ( thanks for the excellent color matches ) and we used PPG DU1000 clear, harder and more chemical resistance than the PPG 2042. I have 5 colors on my EMC2, missile red, white, royal blue, bright yellow, silver and black along with some black vinyl that Lance Robbins cut.
Below is the total weights added to raw components with seams and pin holes already filled ( primer, base color coats, vinyl and clear coat )
Fuse - 100 grams
Belly pan - 15 grams ( belly pan painted and clear coated on inside also )
Canopy - 6 grams ( plastic canopy painted on OUTSIDE  silver, red border and black fogging from red into silver)
2 wheel pants - 4 grams
2 landing gear legs 2 grams
127 grams total or 4.4 ounces, not bad for a large plane like the EMC2.
Also, colors are opaque and finish will rival your late model base coat/clear coat car finish. With careful attention to detail and proper preparation a light, high quality finish is possible. I think I'm on track for an 10lb 9oz EMC2, possibly less.
Ed M.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030518/c12a32bb/attachment.html