Melting Ultracoat for paint help
Gray E Fowler
gfowler at raytheon.com
Fri May 9 07:59:24 AKDT 2003
How bout plutonium.....
Gray Fowler
Principal Chemical Engineer
Composites Engineering
patterndude at attbi.com
Sent by: discussion-request at nsrca.org
05/09/2003 10:44 AM
Please respond to discussion
To: discussion at nsrca.org
cc:
Subject: Re: Melting Ultracoat for paint help
Acetone may work on Monocote, I didn't try that. On Ultracote, though,
Acetone did not work, neither did Toluene, Xylene, MEK. This is amazingly
resilient stuff. This would be a good property under normal circumstances.
--Lance
> acetone. I cut the covering up into confetti-like pieces ( paper punch
works
> well) and soak and stir them in an old 35mm film canister...croz
> ----- Original Message -----
> From: <patterndude at attbi.com>
> To: <discussion at nsrca.org>
> Sent: Thursday, May 08, 2003 11:11 AM
> Subject: Melting Ultracoat for paint help
>
>
> > I read a hobby tip long ago that I can't recall. It named a solvent
that
> you
> > can soak Ultracoat/monocoat in which dissolves the color. You can
then
> use
> > this to make small quantities of touch up paint that match your
covering.
> >
> > I have a small chip to repair in a paint scheme that matches
ultracoat. I
> > took some Ultracoat and soaked it in MEK, Acetone with poor results.
The
> > color can be rubbed off, but balls up and is not liquidy.
> >
> > Anyone remember the solvent that works?
> > --Lance
> > PS. Ultracoat film is amazingly resistant. The clear film isn't
attacked
> by
> > an overnight soak in MEK. pretty amazing.
> > =====================================
> > # To be removed from this list, send a message to
> > # discussion-request at nsrca.org
> > # and put leave discussion on the first line of the body.
> > #
> >
> >
>
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>
=====================================
# To be removed from this list, send a message to
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030509/6c997a72/attachment.html
More information about the NSRCA-discussion
mailing list