Y.S.140L

[David Harmon]

John...I just remembered that if the spring inside the regulator housing
is upside down or not positioned properly over the rubber plunger will
cause problems.
The large end of the spring goes toward the brass screw.

Dave

-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
On Behalf Of flyboy422 at juno.com
Sent: Tuesday, May 06, 2003 4:17 PM
To: discussion at nsrca.org
Subject: Re: Y.S.140L



 I have tried 3 different check valves and the regulator is installed
correctlly. I checked the regulator and didn't see anything unusual but
I will swap it with my other engine and give it a try. Thanks for the
help!

                 John
=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#



=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#