Tinting the Temptation canopy

[D Suding]

Tony

Do you spray the tinted clear on the INSIDE of the canopy, or the OUTSIDE?

-Dennis

> Mr. Suding:
>
> I SPRAY on a coat of clear, tinted with some black (about 10 parts clear
> to 1 part black).  This is easy to do, as you can completely finish the
> airplane, rub down the canopy with a "Scotch Bright" pad, mask off the
> canopy, then spray the "tint".  Apply additional coats of paint until
> you get the desired tint.  Very easy to do.
>
> ----- Original Message -----
> From: "D Suding" <junk at velocitus.net>
> To: <discussion at nsrca.org>
> Sent: Wednesday, April 30, 2003 4:43 PM
> Subject: Tinting the Temptation canopy
>
>
>> Guys (ATTN Lee Davis)
>>
>> Has anyone tinted the Temptation canopy? What method did you use? I am
>> planning on using Ritt dye and 140 degree water with a pinch of salt.
>> Will this work? Any other ideas?
>>
>>
>>
>>
>> =====================================
>> # To be removed from this list, send a message to
>> # discussion-request at nsrca.org
>> # and put leave discussion on the first line of the body.
>> #
>>
>>
>>
>
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #



=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#