Webra bubble boys

[Brian Young]

This is true, Ive had similar experience.

--- Gray E Fowler <gfowler at raytheon.com> wrote:
> Guys....
> 
> Do what Lance said...Back off the pump pressure.
> Both Lance and I flew the 
> Webra/Bully for years and every single one of them
> required a lower pump 
> pressure than how it was set from the factory. You
> will know that you have 
> too low of a pressure when you can open the needle
> valve all the way and 
> there is no change. Get there and then increase it a
> bit. Once you get 
> that set you will find that you can adjust the low
> end needle to do what 
> it was supposed to do...adjust the idle not the mid
> range.  The engine 
> does not require alot of pressure to
> operate.....just enough to get it to 
> the carb.
> 
> 
> 
> Gray Fowler
> Principal Chemical Engineer
> Composites Engineering


=====
Brian Young
Tulsa
b4598070 at yahoo.com
918-745-6046h
918-838-0900w

__________________________________________________
Do you Yahoo!?
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com
=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#