Webra low end setting

[Rodney Tanner]

Hi Steve,

Another 2 or 3 clicks open on the low end should do
it. I had exactly the same problem and followed Lee´s
advice to leave the pump alone and concentrate on
getting the low end setting right. The final setting
is just over a 1/4 turn out and the tickover is
constant at about 2,000 rpm.
I would also advise that you check and tighten the
head and back plate bolts and the carb retaining
screw. All were loose on mine. 

Rodney
NSRCA 2906


--- Patternrules at aol.com wrote:
>  Lee thanks for your reply, I have tried to lean the
> low end, and yes the 
> transition seems to be great but it will idle for
> just a couple of seconds 
> then dies, although I haven't tried to fly it that
> way. I'm from the old day 
> and always liked to set my idle where it could set
> there for the longest of 
> time, maybe I'm expecting to much from these big
> engines.
>  Would love to come to SC but that's a long drive,
> maybe can catch a ride 
> with Andrew and Bob Kane this fall.
> 
> Thanks
> Steve Maxwell
> 


__________________________________________________
Do you Yahoo!?
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com
=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#