MK Ball Bearing Elevator Bellcrank (Check alignment!)

[NSRCA Canada-West]

Folk's

As an aside to the MK bellcrank weight... take a good look at the assembly put together on a flat surface. Do the outside horns  line up equally? Mine does not and will require some modification to make it true. It appears that the center section hole is misaligned... anyone have a similar problem?

Dave Reaville
NSRCA I-VP
Canada West District
NSRCA 3156
MAAC 56510  
  ----- Original Message ----- 
  From: Ann & Dave Burton 
  To: discussion at nsrca.org 
  Sent: Tuesday, March 18, 2003 1:13 PM
  Subject: Re: MK Ball Bearing Elevator Bellcrank


  My digital scale bounces between .02 and .03 lbs. and settles at .02.
  Translates to between .32 to .48 oz. and probably closer to .32 oz.

  "Tomanek, Wojtek" wrote:
  > 
  > If any one has a weight of the MK bellcrank unit (narrow and/or wide), I
  > would greatly appreciate??
  > 
  > TIA,
  > Wojtek
  > 
  > 
  > =====================================
  > # To be removed from this list, send a message to
  > # discussion-request at nsrca.org
  > # and put leave discussion on the first line of the body.
  > #

  -- 
  -----------------------------------------------------
  Click here for Free Video!!
  http://www.gohip.com/free_video/
  =====================================
  # To be removed from this list, send a message to 
  # discussion-request at nsrca.org
  # and put leave discussion on the first line of the body.
  #
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030318/a5c0d1fe/attachment.html