After run oil in YS.

[Del Rykert]

Dean recommended Mobil 1 to me years ago when I started with 4 - cycles and it has served me well.
 
     Del K. Rykert
     AMA - 8928 
     NSRCA - 473
     Kb2joi - General 


  ----- Original Message ----- 
  From: Dean Pappas 
  To: discussion at nsrca.org 
  Sent: Tuesday, February 25, 2003 1:15 PM
  Subject: RE: After run oil in YS.


  Hi Ihncheol,
  Mobil 1 is completely safe in a YS. 
  You can conduct the important test for yourself, with any after-run.
  Simply take a used diaphragm, and immerse it in the after-run of choice for a day.
  If it has not visibly swelled then your lube is O.K.
  Dean Pappas

  -----Original Message-----
  From: Ihncheol Park [mailto:PatternFlyer at msn.com]
  Sent: Tuesday, February 25, 2003 4:00 PM
  To: NSRCA
  Subject: After run oil in YS.


  Ok, here is a thing that we talked about while ago.
  I am getting ready to fire up the engines since the weather is getting
  better with lots of sun although temp is still pretty low.

  So far, there have been several type of oils used as after run-oil for all
  of

  I have been using Mobile 1 synthetic since last year, so far no problem.
  All my engines (including 4-YS, 6-OS of pumped and non-pumped 2-stroke and
  4-stroke) that I have are now flooded (full inside) with the oil to prevent
  rust.

  What else do people use?

  There is a current thread at RCU YS support forum talking about after
  run-oil.
  Below is a direct quote from RCU post by Dave Shadel.

  "Better to run nothing than the wrong after run oil. Almost any petroleum
  based high solvent content oil is wrong for a YS. Don't use WD40, Marvel,
  transmission fluid, 3 in 1, or a host of others. We sell a compatible oil
  known as Ultra Oil."

  "My guess is that the solvent content of Mobil 1 is too high. I've never
  tried it."

  What do you think?
  Also, what actually goes wrong if we use wrong type of after run oil?

  Thanks,

  Ihncheol Park

  1973 White Ave., #402
  Moscow, ID 83843
  (208) 883-7882 (home)
  (208) 661-5018 (cellular)
  PatternFlyer at msn.com


  =====================================
  # To be removed from this list, send a message to 
  # discussion-request at nsrca.org
  # and put leave discussion on the first line of the body.
  #

  ============# To be removed from this list, send a message to 
  # discussion-request at nsrca.org
  # and put leave discussion on the first line of the body.
  #
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030315/aade0d72/attachment.html