Mintor Here.....

[V Bortone]

OK.  Looks that figures are close.  Mine runs about 8,200 rpm also for 
real setting.  If I peak engine on ground it will give a little over 
8,300 rpm.  However, I have to back up to around 8,200 rpm since the 
engine will be too lean in the air.

I think you can save some money using K&B 1L plugs.  Don't ask me why 
but I see same performance than using OS F and/or A5 combinations.

Thanks,

Vicente



----- Original Message -----
From: Jon Uhler <juhler at bellsouth.net>
Date: Tuesday, June 24, 2003 10:34 am
Subject: re: Mintor Here.....

> Vicente
> 
> I am using the 17x10N as well.  I have a couple 17x12 N's that I 
> plan on trying out, needed to get a new spinner first (Thanks 
> Terry T. - just got back from vacation - check is OTW).
> 
> So far I really love the 17x10N, but it rips every once and a 
> while so I plan on trying the 12. 
> 
> This by far is the best engine that I have ever owned.  I am using 
> the standard header with a Greive's pipe.  The header is un-cut.  
> I am running Coolpower 15 % and still running it pretty rich.  I 
> have a OS 8 and OS F plugs in the motor.  I am getting around 8200 
> RPM's.
> Jon
> 
> =====================================
> # To be removed from this list, send a message to 
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
> 
> 

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#