Mintor Here...

[V Bortone]

Let me know how works for you.

Good luck,

Vicente



----- Original Message -----
From: Tom Collins <tomc at buyrc.com>
Date: Tuesday, June 24, 2003 8:04 am
Subject: RE: RE: RE: Mintor Here...

> I'll get some and try them. Sometimes the A5s are hard to find.
> 
> -----Original Message-----
> From: discussion-request at nsrca.org
> [discussion-request at nsrca.org]On Behalf Of V Bortone
> Sent: Tuesday, June 24, 2003 5:04 AM
> To: discussion at nsrca.org
> Subject: Re: RE: RE: Mintor Here...
> 
> 
> Yes, both are KB-1L
> 
> 
> 
> ----- Original Message -----
> From: Tom Collins <tomc at buyrc.com>
> Date: Tuesday, June 24, 2003 1:47 am
> Subject: RE: RE: Mintor Here...
> 
> > Are you running both plugs with KB-1L?
> > 
> > -----Original Message-----
> > From: discussion-request at nsrca.org
> > [discussion-request at nsrca.org]On Behalf Of V Bortone
> > Sent: Monday, June 23, 2003 6:58 PM
> > To: discussion at nsrca.org
> > Subject: Re: RE: Mintor Here...
> > 
> > 
> > I agree.  I have the Mintor 140 and is running extremely well.  
> I 
> > still 
> > learning to use the engine.  I know that if I peak the engine on 
> > ground 
> > that setting would be to lean in the air.  I think that the best 
> > setting is to peak and open almost 1/4 turn.  Don't be afraid of 
> > trying 
> > KB-1L glow plugs.  You will be surprised.
> > 
> > Vicente Bortone
> > 
> > 
> > 
> > ----- Original Message -----
> > From: Woodward James R Civ 412 TW/DRP/ACQ 
> > <James.Woodward2 at edwards.af.mil>
> > Date: Monday, June 23, 2003 6:39 pm
> > Subject: RE: Mintor Here...
> > 
> > > Don't worry Bob - our numbers are growing.  I think a few 
> people 
> > were> impressed this weekend with my Mintor/APC 17 x 13, Cool 
> > Power 15%, 
> > > Phase One
> > > V.3 combination in Fresno.    The 140 runs like a Rolex.  The 
> > 170 
> > > runs like
> > > a Rolex - with a solid rocket booster from the space shuttle 
> > > behind it.
> > > 
> > > Jim W.
> > > 
> > > 
> > > 
> > > 
> > > 
> > > I know *many* of you already have had this pleasure...but I 
> just 
> > > had to
> > > share my reaction when opening this box...
> > > 
> > >    The precision, workmanship, finish, and attention to 
> details 
> > > on the
> > > OUTSIDE of this 1.40 sort of just leaves you grinning, while 
> you 
> > > slowly turn
> > > the motor in your hands, examining every inch of this Italian 
> > beauty.> 
> > >    I'm sure it's the same as you YS types when you first 
> > received 
> > > your1.60's... <BG>
> > > 
> > > 
> > > 
> > >    Assolutamente Bello !!!
> > > 
> > >    Perfetto !!!
> > > 
> > > 
> > > 
> > > Maybe there needs to be a "Mintor Support Group" of those who 
> > > *know*....
> > > Gonna go look at it some more....
> > > 
> > > 
> > > Bob Pastorello, Oklahoma
> > > NSRCA 199, IMAC 1320, AMA 46373
> > > rcaerobob at cox.net <')" >rcaerobob at cox.net> 
> > > www.rcaerobats.net <" target="l">" 
> > target="l">" target="l">http://www.rcaerobats.net> 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > 
> > =====================================
> > # To be removed from this list, send a message to 
> > # discussion-request at nsrca.org
> > # and put leave discussion on the first line of the body.
> > #
> > 
> > 
> > =====================================
> > # To be removed from this list, send a message to 
> > # discussion-request at nsrca.org
> > # and put leave discussion on the first line of the body.
> > #
> > 
> > 
> 
> =====================================
> # To be removed from this list, send a message to 
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
> 
> 
> =====================================
> # To be removed from this list, send a message to 
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
> 
> 

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#