Mintor Here...

[Tom Collins]

Are you running both plugs with KB-1L?

-----Original Message-----
From: discussion-request at nsrca.org
[mailto:discussion-request at nsrca.org]On Behalf Of V Bortone
Sent: Monday, June 23, 2003 6:58 PM
To: discussion at nsrca.org
Subject: Re: RE: Mintor Here...


I agree.  I have the Mintor 140 and is running extremely well.  I still 
learning to use the engine.  I know that if I peak the engine on ground 
that setting would be to lean in the air.  I think that the best 
setting is to peak and open almost 1/4 turn.  Don't be afraid of trying 
KB-1L glow plugs.  You will be surprised.

Vicente Bortone



----- Original Message -----
From: Woodward James R Civ 412 TW/DRP/ACQ 
<James.Woodward2 at edwards.af.mil>
Date: Monday, June 23, 2003 6:39 pm
Subject: RE: Mintor Here...

> Don't worry Bob - our numbers are growing.  I think a few people were
> impressed this weekend with my Mintor/APC 17 x 13, Cool Power 15%, 
> Phase One
> V.3 combination in Fresno.    The 140 runs like a Rolex.  The 170 
> runs like
> a Rolex - with a solid rocket booster from the space shuttle 
> behind it.
> 
> Jim W.
> 
> 
> 
> 
> 
> I know *many* of you already have had this pleasure...but I just 
> had to
> share my reaction when opening this box...
> 
>    The precision, workmanship, finish, and attention to details 
> on the
> OUTSIDE of this 1.40 sort of just leaves you grinning, while you 
> slowly turn
> the motor in your hands, examining every inch of this Italian beauty.
> 
>    I'm sure it's the same as you YS types when you first received 
> your1.60's... <BG>
> 
> 
> 
>    Assolutamente Bello !!!
> 
>    Perfetto !!!
> 
> 
> 
> Maybe there needs to be a "Mintor Support Group" of those who 
> *know*....
> Gonna go look at it some more....
> 
> 
> Bob Pastorello, Oklahoma
> NSRCA 199, IMAC 1320, AMA 46373
> rcaerobob at cox.net <')" >rcaerobob at cox.net> 
> www.rcaerobats.net <" target="l">http://www.rcaerobats.net> 
> 
> 
> 
> 
> 
> 

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#


=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#