Webra-cline

[Brian Billings]

That is great to here Jim, I will more then likely end up going that route as well in the end. I just got mine back together { same new parts as yours but I replaced bearings as well }, went in one turn on pump. Took it to the field Sunday and it would not pump any fuel at all, I pulled the lines from the pump and hooked my fuel jug straight to the inlet and it won't pump a drop. I think I will go your route before buying a new pump. Glad to hear you are finally getting to get some good quality flying in. I am going to pull pump apart tonight and see what is up. 
  ----- Original Message ----- 
  From: jim ivey 
  To: discussion 
  Sent: Monday, June 16, 2003 12:08 AM
  Subject: Webra-cline


  Info for Brian Billings
   Just an update on my webra- Focus. I replaced the piston, ring and rod, I installed the cline system with a regular backplate with pressure tap. The tank pressure runs 7.5 to 8.0 PSI.
  I now have 1.5 gals fuel through the engine with 10 flights today. I set it up for 8000 and 2000 rpm's. The engine now runs flawless. There are no stumbles in midrange, no hesitations on advancing throttle and best of all, no sags on long up lines. On the 3 point up top hat, I set the throttle at 3/4 to start up and it's still at 3/4 pulling across on the top. Now maybe I can get down to business.

  Jim Ivey

  jivey61 at msn.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030616/44f68665/attachment.html