DZ headbolts

[bryan]

thanks alot Vern 
see you at the nats
Bryan
WWW.EXECUTIVEAIRFRAMES.COM
  ----- Original Message ----- 
  From: Verne Koester 
  To: discussion at nsrca.org 
  Sent: Thursday, June 12, 2003 7:12 PM
  Subject: Re: DZ headbolts


  Bryan,
  Indy RC used to sell the 1/4-32 kits you need which were manufactured under the trade name "Recoil". As far as I know, Helicoil has never offered the 1/4-32 size. I'm pretty sure Recoil is still in business. Not sure about Indy RC, though. Hope this helps, somehow.
   
  Verne 
   

    ----- Original Message ----- 
    From: bryan 
    To: discussion at nsrca.org 
    Sent: Wednesday, June 11, 2003 6:43 PM
    Subject: Re: DZ headbolts


    I need a Head for a YS 1.40 fz or L for a friend 
    if someone has one they would let go cheap 
    also does any one know if they make repair helicoil kits for these motors for striped glow plugs?
    Bryan
    WWW.EXECUTIVEAIRFRAMES.COM
      ----- Original Message ----- 
      From: Zoro1024 at aol.com 
      To: discussion at nsrca.org 
      Sent: Thursday, June 12, 2003 3:30 AM
      Subject: DZ headbolts


      Someone posted a problem with loose head bolts on their DZ a few days ago.  Mine did the same .  It started 6 or so flights ago, and terminated this evening with a blown head gasket.  I should have paid attention and checked mine before. Thought I'd post this for anyone who thinks, oh well theres probably only one engine like that and mine is just fine, maybe not.


      Mike H.
      nsrca 3509 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030612/696b0477/attachment.html