Desperately needed: AAP Header

[John Ferrell]

I will offer an unsolicited endorsement on this product.
I have used a couple of these for a couple of seasons with Hyde mounts and no breakage!

Tip: The locking nut is 18mm and there is very little room for a standard wrench between the head & the header nut.
Go to your local bicycle shop and get an 18mm wrench made from stamped sheet metal. You may think you won't need it, but you will!
 
John Ferrell 
6241 Phillippi Rd
Julian NC 27283
Phone: (336)685-9606  
johnferrell at earthlink.net
Dixie Competition Products
NSRCA 479 AMA 4190  W8CCW
"My Competition is Not My Enemy"

  ----- Original Message ----- 
  From: Emory Schroeter 
  To: discussion at nsrca.org 
  Sent: Sunday, June 08, 2003 11:24 AM
  Subject: Re: Desperately needed: AAP Header


  Anthony,

  You might look at this website...
  http://home.att.net/~rc-enterprises/rcme_013.htm
  I don't know if the dimensions are the same, but they look similar.

  Emory Schroeter.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030608/30a16cb3/attachment.html