Control throws for Karl's Star

Karl G. Mueller kgamueller at rogers.com
Fri Jun 6 17:24:43 AKDT 2003


Hi Trevor,

Good starting point are the following settings:
Aileron :  Low 8°, High 14°, Snap 16°.
Elevator: 7° Up, 8° Down, High 16°, Snap 16°.( if using snap switch).
Rudder: High: as much as clearance between Elevators allows.
            Low: about 70% of high or as much as is needed to hold
knife edge in point rolls.
All these settings of course depend on where your CG is located.
Start with 1 3/16" behind center of wing tube.

Karl.


----- Original Message ----- 
From: "Trevor Scott" <rc_beagles at hotmail.com>
To: <discussion at nsrca.org>
Sent: Friday, June 06, 2003 5:52 PM
Subject: Control throws for Karl's Star


> What are the control throws for Karl's version of the USA Star.
> Thank you for any help.
> Trevor Scott
>
> _________________________________________________________________
> The new MSN 8: smart spam protection and 2 months FREE*
> http://join.msn.com/?page=features/junkmail
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#



More information about the NSRCA-discussion mailing list