MC carb for Webra

[Jerry Budd]

Hi Brian,

What's your setup?  i.e. pipe & length, plug, prop, fuel, airplane 
(including weight), rpm's, etc.

The reason I'm asking is I've got quite a bit of experience with the 
Webra's (including the MC carb) and I may be able to suggest some 
work arounds until the MC is available again via Horizon (I'm 
guessing but they probably underestimated the demand for the carb and 
got caught short on stock).

Jerry

>Sounds interesting Jim, let me know how it works out. Mine is 
>driving me crazy, I have it running ok right now but it is kind of 
>off and on type of power. I have been flying her but I know it is 
>not right, still managed to get a gallon through it sunday with easy 
>starts good reliability but as far as uplines go it is either all or 
>nothing, no middle.
>
>----- Original Message -----
>From: <mailto:jivey61 at msn.com>jim ivey
>To: <mailto:discussion at nsrca.org>discussion
>Sent: Wednesday, June 04, 2003 10:30 PM
>Subject: Re: MC carb for Webra
>
>Brian
>I put a cline regulator, a regular back plate with a press. tap, and 
>pressurized the tank on my Webra. The ground runs have been more 
>stable for throttle position The needles are a lot less sensitive 
>and it doesn't seem to be fat in the middle.
>When I find some time to fly I think it will finally run good. I 
>must have had a pump problem because too many people are running 
>this engine. I did find a piece of foreign material in the pump. 
>This was in the pump from day one. I used a YS filter and nuttin' 
>gets through a YS filter.
>Will let you know when I fly it, how it does.
>
>Jim Ivey
>
>
>----- Original Message -----
>From: Brian Billings
>Sent: Wednesday, June 04, 2003 2:10 PM
>To: discussion at nsrca.org
>Subject: Re: MC carb for Webra
>
>Thanks Tony, that is what I thought.
>
>----- Original Message -----
>From: <mailto:tony at radiosouthrc.com>Tony Stillman
>To: <mailto:discussion at nsrca.org>discussion at nsrca.org
>Sent: Wednesday, June 04, 2003 9:45 AM
>Subject: Re: MC carb for Webra
>
>Brian:
>
>Horizon is the USA importer for Webra, so if they are out, you 
>probably won't find one.  The only other answer is to go direct to 
>Webra in Europe.
>
>Tony Stillman
>Radio South
>3702 N. Pace Blvd.
>Pensacola, FL 32505
>1-800-962-7802
><http://www.radiosouthrc.com/>www.radiosouthrc.com
>
>----- Original Message -----
>From: <mailto:auto7832 at bellsouth.net>Brian Billings
>To: <mailto:discussion at nsrca.org>discussion at nsrca.org
>Sent: Tuesday, June 03, 2003 8:29 PM
>Subject: MC carb for Webra
>
>Does anyone know where I can buy the Webra MC carb, Horizon shows 
>them on their website but they don't have any in stock and where 
>unable to tell me when they would. Thanks in advance
>
>Brian Billings


-- 
___________
Jerry Budd
mailto:jbudd at qnet.com
=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#