Webra 1.45

[Wayne Galligan]

HMMM...   check header attachment at the engine exhaust.   I had a similar problem with my S.T. and it had a dark exhaust but then engine is still fine after 300+flights.  I believe mine was from where the side exhaust header touched the exhaust flange even though it was tight.

WG

  ----- Original Message ----- 
  From: Bill Pritchett 
  To: discussion at nsrca.org 
  Sent: Friday, July 25, 2003 5:05 PM
  Subject: Re: Webra 1.45


  checked for pipe/header clearance.  It's fine.  Running PowerMaster 15%
  Bill

    ----- Original Message ----- 
    From: Wayne Galligan 
    To: discussion at nsrca.org 
    Sent: Friday, July 25, 2003 5:56 PM
    Subject: Re: Webra 1.45


    Make sure you dont have anything in your pipe system that is loose or rubbing.  Black is a sign of aluinimun wearing somewhere.  What fuel are you running?

    WG

      ----- Original Message ----- 
      From: Bill Pritchett 
      To: discussion at nsrca.org 
      Sent: Friday, July 25, 2003 4:38 PM
      Subject: Webra 1.45


      I've just completed test flying my new Focus, and the plane is great.  Wonder if I should be concerned about how dark the exhaust residue is....... first few flights, almost black.  Purchased used, so not completely sure of it's history.  Runs fine, but......???

      Bill Pritchett
      765-744-9322
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030725/74774d56/attachment.html