Fixed gear mounting.

[Doug Bennett]

I have the same plane and would advise to use the blind nuts.  My wood
screws started to come loose after awhile then after almost every flight.  I
fixed it by using the nut zerts that screw in to the wood and you epoxy in
place.  No problems since.  Doug

----- Original Message -----
From: "Ihncheol Park" <PatternFlyer at msn.com>
To: "NSRCA" <discussion at nsrca.org>
Sent: Thursday, July 17, 2003 3:07 AM
Subject: Fixed gear mounting.


> I forgot to ask.
>
> I am about to start building the JR Propo Explorer V90.
> The kit has fixed aluminum gear.
> The kit does not have blind nuts for gear mounting and uses self tapping
> screws on plywood block on wood fuselage.
> Would you install this way or with blind nuts and standard screws?
>
> Thanks,
>
> Ihncheol
>
>
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#