9ZAP Question

[wgalligan]

You might have gone into the initialization section by accident.    Was this CamPac ever programed on an 8UA?  If so it wont work in the 9Z and has to be reinitialized.   You cant go from 8UA to 9Z or back.

Wayne G.

    -----Original Message-----
    From: BUDDYonRC at aol.com <BUDDYonRC at aol.com>
    To: discussion at nsrca.org <discussion at nsrca.org>
    Date: Friday, July 04, 2003 8:03 AM
    Subject: 9ZAP Question
    
    
    Something strange happened with my 9 ZAP that I cant explain and I am looking for possible answer.
    At the field yesterday I was making some trim changes prior to flying. I turned the transmitter off and when I turned it back on the message "Initialize Ext Mem" YES No
    came on.
    The CamPac is not new and had several models stored in it. If I selected No the transmitter would not recognize the CamPac as being installed, If I removed the CamPac I would not get the message when the transmitter was turned on. I flew without the CamPac and when I was through flying I installed the CamPack and when I turned the transmitter on and got the message I selected YES and everything went back to normal except the CamPac was wiped clean and all model data reads UNUSED all model data stored in it was lost. Does anyone have a clew as to what caused this to happen?
    Buddy Brammer   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030704/b3c1d428/attachment.html