Rear Bearing w/Nylon Retainers

[ronlock]

In discusion with Boca, I was led to understand the
Boca Hi Speed bearings are no better than their
standard bearings for applications under 20,000 
or so rpm.

Ron Lockhart
----- Original Message ----- 
From: "Richard Hallett" <happl at midmaine.com>
To: <discussion at nsrca.org>
Sent: Sunday, January 05, 2003 2:21 PM
Subject: Re: Rear Bearing w/Nylon Retainers


> Boca sells several grades.  Ask for the high quality units.
> 
> Rick
> Pittsfield ME
> ----- Original Message ----- 
> From: "Jerry Budd" <jbudd at QNET.COM>
> To: <discussion at nsrca.org>; <pattern at rcmailinglists.com>
> Sent: Sunday, January 05, 2003 1:09 PM
> Subject: Rear Bearing w/Nylon Retainers
> 
> 
> > Hi all,
> > 
> > Does anyone know of a source of bearings with nylon retainers?  I 
> > need to replace the rear bearing in my OS-140RX and it was suggested 
> > to me by a leading engine authority that a bearing with nylon 
> > retainers (not phenolic) might help.  To date I've been using the 
> > inexpensive Boca Bearings with mixed results; the last bearing 
> > failure took out the piston/sleeve.  I have not used any other 
> > bearings but I am open to suggestions!
> > 
> > TIA, Jerry
> > -- 
> > ___________
> > Jerry Budd
> > mailto:jbudd at qnet.com
> > =====================================
> > # To be removed from this list, send a message to 
> > # discussion-request at nsrca.org
> > # and put leave discussion on the first line of the body.
> > #
> > 
> > 
> 
> =====================================
> # To be removed from this list, send a message to 
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
> 
> 

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#