Plans for the Hovering Cobra

[Van - E-Mail LIST]

That would be great Daniel, and thanks for the modification tips. How much do I need to send you, and to where ?

My mailing address is:

Van Flowers
4014 Water Park Court
Riverview, FL 33569

Many thanks Daniel
________________________________________________

Van Flowers
AMA: 6216  NSRCA: 2778




  ----- Original Message ----- 
  From: Daniel Dupont 
  To: discussion at nsrca.org 
  Sent: Thursday, January 02, 2003 8:17 AM
  Subject: Re: Plans for the Hovering Cobra


  Hi Van,

  I have the set of plan an it's new, I made copy to used during construction that I cut up....that way I can look at the plan on the wall during construction.

  The problem is that this plane design was sold to somebody...either in Australia or New Zealand ??  I could perhaps send you a copy of it, I will see if I have a couple left....I would also send a copy of the manual.

  I lost mine last summer due to the elevator servo screw backing off the servo just enough to allow the arm to be free....while I did like the plane a lot there two thing I would modify, the fuselage is very weak I understand that some were weaker then other mine was weak....during roll you could observe the tail bending.. pretty neat effect, number two with my Extended Van I had difficulty carrying two Pattern Planes and this Fun Fly...it's big 48 x 54 if I remember correctly so I would make the wing two pieces I think.

  Regards Daniel


  At 05:47 PM 1/1/03 -0500, you wrote:

    I'm looking for a set of plans, or a kit of the "Hovering Cobra". If you have a set of plans ( that are in usable shape ) or a kit you would like to sell, please contact me privately in e-mail, so the list is not cluttered. There are several members at my club that are wanting to build this plane, and I'm trying to help locate them.
     
    Thanks for your help,
    ________________________________________________
     
    Van Flowers
    AMA: 6216  NSRCA: 2778
     
     
     
     
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030102/1c88a007/attachment.html