balsa sheeting question

Del K. Rykert drykert at rochester.rr.com
Mon Dec 29 14:47:23 AKST 2003


Same understanding that was shared with me. Just wet the side you want to curve the most.  Normally outside..
 
        del

  ----- Original Message ----- 
  From: Bill Glaze 
  To: discussion at nsrca.org 
  Sent: Friday, December 12, 2003 1:48 PM
  Subject: Re: balsa sheeting question


  I read ages ago that ammonia helps soften the resin holding the wood fibers together.  It softens the resin just enough to aid bending and to let the fibers partially "slide" by each other.  Or so I was told.
  Bill Glaze

  Mike Turgeman wrote:

It will help you bend the balsa sheets if you spray it on just the outer side. The wood fibers will expand and the result is bending toward the dry side. I do not use amonia because of the odor you can try hot water it will do the same.
Mike

----- Original Message ----- 
From: "John Crozier" <sjcrozier at comcast.net>
To: "nsrca discussion" <discussion at nsrca.org>
Sent: Thursday, December 11, 2003 10:03 PM
Subject: balsa sheeting question


  I'm about to sheet my turtle deck with 2mm balsa.
The last time I did this, I put amonia in the spray bottle.
What, if anything, does ammonia do to aid the bending/drying?
Thanx...croz

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#



    

==================================# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20031229/7b1fe7a1/attachment.html


More information about the NSRCA-discussion mailing list