Fuel/Water, Bearing/Rust

[Ed Miller]

If you can get stainless with 2 rubber seals ( 2RS ), that's what I'd use and leave both seals in place. Be careful with the amount of heat applied to the case when installing the bearing as to not burn the edges of the rubber seals as the heat transfers from the case to the bearing.
Ed M.
  ----- Original Message ----- 
  From: JonLowe at aol.com 
  To: discussion at nsrca.org 
  Sent: Saturday, December 06, 2003 12:40 PM
  Subject: Re: Fuel/Water, Bearing/Rust


  In a message dated 12/06/2003 10:18:12 AM Central Standard Time, rcaerobob at cox.net writes:



    And timely reminder about our old 2C .60 woes!  Man, my OS 61RF would go through the bearings like crazy!


  Ok, I am rebuilding a OS61 RF right now.  What bearings would you suggest?  Stainless from Boca?

  Jon Lowe

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20031207/c98ebe5b/attachment.html