Winter / Focus / Prop Drag

Chuck Czarnik CCzarnik at arclp.com
Thu Dec 4 05:20:00 AKST 2003


Autogyros depend upon a windmilling prop..  They don't fly too well with
a stopped rotor.  I'm not an engineer, but this satisfied me years ago
when this debate came up in some of the GA circles I was in.

Hope this helps, Chuck

-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
On Behalf Of Adam Glatt
Sent: Wednesday, December 03, 2003 10:16 PM
To: discussion at nsrca.org
Subject: Re: Winter / Focus / Fuel/Electric.

John, experimentation or theory, though I have yet to hear anyone 
qualify the statement that a slow turning prop causes more drag than a 
stopped one with an explanation.

John Ferrell wrote:

>As I am sure you are aware, full scale pilots have been taught for many
>years that a windmilling prop creates more drag that a stopped prop.
>
>How do you determine what rpm generates the most drag?
>
>John Ferrell
>6241 Phillippi Rd
>Julian NC 27283
>Phone: (336)685-9606
>johnferrell at earthlink.net
>http://home.sprintmail.com/~johnferrell/dixiecompetitionproducts/
>NSRCA 479 AMA 4190  W8CCW
>"My Competition is Not My Enemy"
>
>
>----- Original Message ----- 
>From: "Doug Cronkhite" <seefo at san.rr.com>
>To: <discussion at nsrca.org>
>Sent: Wednesday, December 03, 2003 4:28 PM
>Subject: RE: Winter / Focus / Fuel/Electric.
>
>
>  
>
>>Well.. you fix that by setting a good idle speed before you take off.
You
>>never let the motor stop in flight for a few reasons.. 1) as you
>>described, it looks weird.. 2) a stopped prop is not the best solution
for
>>downline breaking.. 3) the start/stop is hard on the gears..
>>
>>-Doug
>>    
>>
>
>
>=====================================
># To be removed from this list, send a message to 
># discussion-request at nsrca.org
># and put leave discussion on the first line of the body.
>#
>
>  
>


=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#


-----------------------------
NOTICE:  The information contained in this electronic mail message 
is either attorney privileged and/or confidential information intended
only for the use of the individual or agent responsible to deliver
it to the intended recipient; or, alternately, proprietary information
(trade secret).  You are hereby notified that any dissemination, 
distribution or copying of this communication or unauthorized use of the 
information herein contained, is strictly prohibited. If you have 
received this communication in error, please immediately delete it 
from your computer and notify the sender of your receipt of this message.  
==================# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#



More information about the NSRCA-discussion mailing list