Winter (painting)

Bill Pritchett phelps15 at comcast.net
Tue Dec 2 16:05:28 AKST 2003


can't even tell you what I would have paid to watch all of this
happen..........was there any "trade off" on who cleaned it up??


----- Original Message ----- 
From: "Atwood, Mark" <atwoodm at paragon-inc.com>
To: <discussion at nsrca.org>
Sent: Tuesday, December 02, 2003 3:10 PM
Subject: RE: Winter (painting)


Paint booth.  trade off with the spouse...she got to pick the entire
house...As long as it had a 13 block unfinished basement with a straight
staircase.  I have a sealed off 8x8 paint booth with an industrial fan
ducted to pull air from the floor.    Just make sure the basement door is
closed and a basement window open or you'll pull ALL the ashes from the
fireplace into the living room as it tries to suck air from all over the
house. Learned that one the hard way :):)

Yes, I use PPG.


-----Original Message-----
From: Keith Black [mailto:tkeithb at comcast.net]
Sent: Tue 12/2/2003 2:16 PM
To: discussion at nsrca.org
Cc:
Subject: Re: Winter (painting)

Mark,

How are you able to paint during the extreme cold winter weather? Do you use
PPG concept paint?

Do you paint inside or outside?  If inside do you have a separate shop or
attached garage? Do you setup a painting booth?

Thanks,
Keith Black

----- Original Message ----- 
From: "Atwood, Mark" <atwoodm at paragon-inc.com>
To: <discussion at nsrca.org>; <discussion at nsrca.org>
Sent: Tuesday, December 02, 2003 12:57 PM
Subject: RE: Winter


I feel bad for you "year round" flyers.  Not sure how you stay "excited"
about the sport.  In this neck of the woods (Cleveland) we have a pretty
even split...6 months of building, 6 months of flying.  Without it, I'd have
been burnt out years ago.

As it is now...come September, October...I'm tired of dragging the plane to
the field...and start to get an itch to clean the workshop, and embark on a
new project (This year is ambitious for me...2 35% IMAC planes, Painting a
new all composite Pattern plane, some comprehensive repairs, and a new
trainer for my son (building from scratch with a 7 year old is ambitious all
by itself))

Come April..and the Toledo show...The desire to get out and fly is almost
overwhelming.  I get to start the season with a whole new lust for the
sport.

On days like today...cold, windy, dreary...I'm jealous.  But in general,
I'll keep changing seasons...and changing hobbies :):):)

-Mark




-----Original Message-----
From: Wayne Galligan [mailto:wgalligan at goodsonacura.com]
Sent: Tue 12/2/2003 1:46 PM
To: discussion at nsrca.org
Cc:
Subject: Re: Winter

Michael,

 Sunday, 65 degrees light winds.  6 flights... two on the Entropy and 4 on
the Aries... plenty of fuel... ran out of daylight.

WG

----- Original Message ----- 
From: <fishgod at pobox.mtaonline.net>
To: <discussion at nsrca.org>
Sent: Tuesday, December 02, 2003 12:13 PM
Subject: Winter


Winter has been here for a while now.  I have about 44 inches of snow on
the ground and it was a balmy -17F when I left for work.  In the center of
the state it was a little cold at -60F.  Ahhh cant wait for spring.  Come
on May.

Michael Laggis

--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .


============# To be removed from this list, send a message to
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#



=====================================
# To be removed from this list, send a message to
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#




============# To be removed from this list, send a message to
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#

=====================================
# To be removed from this list, send a message to
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#





=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#



More information about the NSRCA-discussion mailing list