Mintor 1.70

[Fernando Viollier]

Hi Wayne

I have a Mintor 170 but I haven't run it yet, could you please tell me if you are happy with your Mintor, any advice for a good operation ??.

Thanks

Fernando
  ----- Original Message ----- 
  From: Wayne Galligan 
  To: discussion at nsrca.org 
  Sent: Monday, August 11, 2003 11:27 AM
  Subject: Mintor 1.70


  Just a few notes on my initial test and break-in on this engine.  It has not been installed in my plane as of this writing but I cant wait.

  3M 1.70 stock header
  10 % Magnum fuel
  Bluebird c.f. 2-stroke pipe  24.25" center of head to 1st baffle.  Total length of exhaust center of head to end of pipe  31.5"

  Test day 98 degrees and about 35%+ humidity

  17x12N APC      high 8500rpm low 1600rpm
  17x13 std APC   high 8250rpm  low 1500rpm 

  This is after 5) 16oz tanks of breakin.  I broke it in just like the OS,  alternating rich to lean during first several tanks.

  Wayne Galligan

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030818/7c9d08be/attachment.html